Mesh

Tolerances shall be in accordance with Table 5 of BS8666. For standard fabric the type of wire shall be designated as a suffix to the fabric reference as illustrated in the example in Figure 2 of BS8666. Standard lengths and widths shall be 4.8m and 2.4m respectively, giving a sheet area of 11.52m.

	B.S. Reference	Mesh Sizes Nominal Pitch of Wires		Size of Wires		Cross Sectional Area per Metre Width		Nominal Mass per Square Metre	Approx. No. of Sheets per tonne
		Main	Cross	Main	Cross	Main	Cross	Nominal Mass per Square Metre	Approx. No. of Sheets per tonne
		mm	mm	mm	mm	mm2	mm2	kg
Square Mesh Fabric	A393	200	200	10	10	393	393	6.16	15
	A252	200	200	8	8	252	252	3.95	22
	A193	200	200	7	7	193	193	3.02	29
	A142	200	200	6	6	142	142	2.22	39
Structural Fabric	B1131	100	200	12	8	1131	252	10.9	8
	B785	100	200	10	8	785	252	8.14	11
	B503	100	200	8	8	503	252	5.93	15
	B385	100	200	7	7	385	193	4.53	20
	B283	100	200	6	7	283	193	3.73	24
	B196	100	200	5	7	196	193	3.05	29
Long Mesh Fabric	C785	100	400	10	6	785	70.8	6.72	13
	C636	100	400	9	6	636	70.8	5.55	16
	C503	100	400	8	5	503	49	4.34	20
	C385	100	400	7	5	385	49	3.41	26
	C283	100	400	6	5	283	49	2.61	34
Wrapping Fabric	D98	200	200	5	5	98	98	1.54	56
Wrapping Fabric	D49	100	100	2.5	2.5	49.1	49.1	0.77	113

Cut & Bent steel reinforcement, reinforcing bar, mesh and accessories

Mesh